| |
Abstracts - Superalloys1 2 3 4 5 6 Category list
January 2011 |
Superalloys |
139-11
D56 (invited lecture) characterisation of deformed and recristallised structure of Co based superalloy with TEM, XRD and EBSD. Otomo T. CURRENT ADVANCES IN MATERS & PROCESSES, 2010, 23(2), 696-699.
|
October 2010 |
798-10
Ni- and Co-based superalloy as potential tool materials for thixoforming of steels. Birol Y. INTNL J. MATER FORMING, 2010, 3(1), Supp 1, 739-742.
|
799-10
Creep behaviour of MARM-M 302 Co-based superalloy. Aghaie-Khafri M, Binesh B. J. MATERS. SCI., 2010, 45(15), 3990-3997.
|
800-10
Effect of Co on As-Cast structure and properties of K4169 superalloy. Li Y, Liu H, Liu J. FOUNDRY TECHNOL, 2010, 31(3), 280-283.
|
801-10
An investigation into the ultrasonic machining of Co-based superalloy using the Taguchi approach. Kumar V, Khamba J. INTNL J. MACHINING & MACHINABILITY OF MATERS, 2010, 7(3/4), 230-243.
|
802-10
Oxidation behaviour and mechanism of powder metallurgy René95 nickel-based superalloy between 800 and 1000°C. Zheng L, Zhang M, Dong J. APP SURFACE SCI, 2010, 256(24), 7510-7515.
|
803-10
Mo effect on the microscture in Co-Al-W-based superalloys. Xue F, Li Z, Feng Q. MATER SCI FORUM, 2010, 654/656(1), 420-423.
|
804-10
Detecting degradation in Ni-based superalloy Udimet520 with scanning SQUID microscopy. Isawa K, Igarashi Y, Hayashi M. PHYSICA C, 2010, 470(20), 1529-1533.
|
805-10
In-situ synthesis of Y2W3O12 within a Co-based superalloy powder mixture. Hopfeld M, Wilden J, Drescher V. INTNL J. MATERS RES, 2010, 101(8), 1042-1045.
|
July 2010 |
574-10
Influence of service-induced microstructural changes on the failure of a cobalt-based superalloy first stage nozzle. Zangeneh S, Farhangi H. MATER & DESIGN, 2010, 31(7), 3504-3511.
|
575-10
Microstructure and high temperature tensile properties of wide gap brazed cobalt based superalloy X-40. Henhoeffer T, Huang X, Yand S. MATERS SCI & TECHNOL, 2010, 26(4), 431-439.
|
576-10
Characterisation of hot deformation behaviour of a new Ni Cr Co based P/M superalloy. Wu K, Liu G, Hu B. MATERS CHARACTERISATION, 2010, 61(3), 330-340.
|
577-10
Work hardening of Duratherm 600 cobalt superalloy using repetitive corrugation and straightening process. Sheikh H, Paimozd E, Hashemi S. RUSSIAN J. NON-FERROUS METALS, 2010, 51(1), 59-61.
|
April 2010 |
366-10
Selection of optimum cutting condition of cobalt-based superalloy with GONNS. Aykut E, Demetgul M, Tansel I. INTNL J. ADVANCED MANUFACTURING TECHNOL, 2010, 46(9-12), 957-967.
|
367-10
Wetting and interactions of Ni- and Co-based superalloys with different ceramics materials. Valenza F, Muolo M, Passerone A. J. MATERS SCI, 2010, 45(8), 2071-2079.
|
January 2010 |
173-10
Constructing processing maps for hot working of Co-Ni-Cr-Mo superalloy. Kartika I, Li Y, Matsumoto H. MATER. TRANS, 2009, 50(9), 2277-2284.
|
174-10
Parametric optimisation of ultrasonic machining of Co-based superalloy using the Taguchi multi-objective approach. Kumar V, Khamba J. PRODUCTION ENGINEERING, 2009, 3(4-5), 417-425.
|
October 2009 |
854-09
Grain structure and texture evolutions during single crytal casting of the Ni-base superalloy CMSX-4. Seo S, Kim I, Lee J. METALS & MATERS INTNL, 2009, 15(3), 391-398.
|
855-09
Intermetallic compounds in Co-base alloys - phase stability and application to superalloy. Ishida K. MATER RES SOC, 2009, 1128, 357-368.
|
July 2009 |
630-09
Alloys by design: Modelling next generation superalloys. Rae C. MATERS. SCI. & TECHNOL., 2009, 25(4), 479-487.
|
631-09
Creep behaviour of new kinds of Ni-Co-base superalloys. Cu Y, cui C, Ping D. MATERS. SCI. & ENGINEERING A, 2009, 510/511(1/2), 250-255.
|
632-09
First creep results on thin-walled single-crystal superalloys. Huttner R, Gabel J, Glatzel U. MATER. SCI. & ENGINEERING a, 2009, 510/511(1/2), 307-311.
|
633-09
Hold-time effects on elevated-temperature low-cycle-fatigue and crack-propagation behaviours of HAYNES® 188 superalloy. Lee S, Lu Y, Liaw P. J. MATERS. SCI., 2009, 44(11), 2945-2956.
|
634-09
Creep degradation of thermally exposed IN738C superalloy. Aghaie-Khafri, M, Farahany S. TRANS. ASME J. ENGINEERING FOR GAS TURBINES & POWER, 2009, 131(3), 034501.
|
635-09
Deformation and microstructure evolution in Co-Ni-Cr-Mo superalloy during hot working. Kartika I, Matsumoto H, Chiba A. METALLURGICAL & MATERS TRANS, 2009, 40(6), 1457-1468.
|
|
|
