January 2008 |
Powders |
166-08
Kinetics of allotropic phase transformation in cobalt powder undergoing mechanical processing. Delogu F. SCRIPTA MATERIALIA, 2008, 58(2), 126-129.
|
167-08
Research on preparation of ultra-fine Co3O4 powder by liquid precipitation. Liu Y. POWDER MET. INDUSTRY, 2007, 17(4), 14-18.
|
168-08
Tailoring deformation-induced effects in Co powders by milling them with alpha-Al2O3. Menendez E, Sort J, Surinach S, J. MATERIALS RES., 2007, 22(11), 2998-3005.
|
October 2007 |
976-07
Synthesis, characterisation and Li-electrochemical performance of high porous Co3O4 powders. Binotto G, Larcher D, Prakash A.
|
July 2007 |
750-07
Explosive consolidation of Sm-Fe-N and Sm-Fe-N/(Ni, Co) magnetic powders. Chiba A, Hokamoto K, Sugimoto S.
|
751-07
Preparation and property of very fine cobalt nickel ferrite magnetic powders. Chen Y, Zhang Y, Zhang X.
|
752-07
Synthesis and characterisation of ultrafine Co-30 wt.%NbC composite powder with a core/rim structure. Xiong Z, Shao G, Shi X.
|
753-07
Synthesis of TiC/Co composite powder by carbothermal reduction of Ti-Co-O based oxide powder. Lee G, Ha G.
|
April 2007 |
511-07
Characteristics of (Fe, M)S2 (M = Co, Ni, Mo) composite powders fabricated by MCP. Jung W, Park D, Jung K.
|
512-07
Fabrication of nano-sized WC/Co composite powder by direct reduction and carburisation with carbon. Lee D, Lee W.
|
513-07
A study of reduced and carburised reactions in dry-milled WO3+Co3O4+C mixed powders with different with different carbon content. Im H, Hur J, Lee W.
|
514-07
Effect of particle size on sintering of WC-Co powders. Maheshwari P, Wang X, Fang Z.
|
January 2007 |
251-07
Hot pressing of nanometer WC-Co powder. Jia C, Sun L, Tang H.
|
October 2006 |
1001-06
Morphology and composition of Ni-Co alloy powders electrodeposited from amoniacal electrolyte. Jovic V, Jovic B, Pavlovic M.
|
1002-06
Preparation of Co powders for cemented carbides in China. Liu S, Xu K, Wang M.
|
1003-06
Sintering of nano-sized WC-Co powders produced by a gas reduction-carburisation process. Lee G, Kang S.
|
July 2006 |
738-06
Electrode properties of La2Mg17 alloy ball-milled with xwt.% cobalt powder (x = 50, 100, 150 and 200). Wang L, Wang X, Chen L.
|
739-06
Hydrogen evolution reaction on Co30Ni70, Ni30Mo70 and Co10Ni20Mo70 alloy powders produced by mechanically alloying. Dominguez-Crespo M, Arce-Estrada E, diaz-Garcia L.
|
740-06
Morphology, internal structure and growth mechanism of electrodeposited Ni and Co powders. Jovia V, Maksimovia V, Pavlovia M.
|
April 2006 |
487-06
Prepararing nano-crystalline rare earth doped WC/Co powder by high energy ball milling. Sha L, Ze-Lan H, Gang L.
|
488-06
Incontinuous grain growth in pure Co nanocrystalline powders prepared by mechanical attrition. Song X, Zhang J, Yang K.
|
489-06
Production of nanocrystalline WC/Co composite powder using a high-energy dual-drive planetary mill. Butler B, Lu J, Fang Z.
|
490-06
Microstructure and mechanical properties of Al2O3-TiC-4vol.%Co composites prepared from cobalt coated powders. Li J, Yin Y, Shi R.
|
491-06
Particle size comparison of soft-chemically prepared transition metal (Co, Ni, Cu, Zn) aluminate spinels. Dhak D, Pramanik P.
|
January 2006 |
218-06
Compaction as a critical factor for success in the sintering of ultra-fine WC-Co powders.
|
