| |
Abstracts - Hard Materials1 2 3 4 5 6 7 8 9 10 11 12 13 Category list
July 2009 |
Hard Materials |
593-09
Effect of WC nanoparticle size on the sintering temperature, density and microhardness of WC-8 wt% Co alloys. Kurlov A, Rempel A. INORG. MATERS, 2009, 45(4), 380-385.
|
April 2009 |
373-09
Effect of ultrasonic-assisted EDM on the surface integrity of cemented tungsten carbide (WC-Co). Abdullah A, Shabgard M, Ivanov A. INTNL J. ADVANCED MANUFACTURING TECHNOL., 2009, 41(3-4), 268-280.
|
374-09
Characterisation of WC-Co with cubic carbide additions. Weidow J, Zackrisson J, Jansson B. INTNL J. REFRACTORY METALS & HARD MATER., 2009, 27(2), 244-248.
|
375-09
Sintering diamon/cemented carbides by the pulse plasma sintering method. Michalski A, Rosinski M. J. AMERICAN CERAMIC SOC., 2008, 91(11), 3560-3565.
|
376-09
Tribological and mechanical properties of HFCVD diamond-coated WC-Co susbtrates with different Cr interlayers. Chou C, Lee J, Chen Y. SURFACE & COATINGS TECHNOL., 2008, 203(5-7), 704-708.
|
377-09
Advanced WC-Co Cermet composites with reinforcement of TiCN prepared by extended thermal plasma route. Mondal B, Das P, singh S. MATERIALS SCI. & ENGINEERING A, 2008, 498(1-2), 59-64.
|
378-09
HVOF-sprayed WC-Co as hard interlayer for DLC films. Bolelli G, Lusvarghi L, Montecchi M. Volz H, brletta M. SURFACE & COATINGS TECHNOL., 2008, 203(5-7), 699-703.
|
379-09
Reciprocative sliding wear of ZrO2-TiCN composites against WC-Co cemetned carbide. Bonny K, De Baets P, Vleugels J. WEAR, 2008, 265(11-12), 1767-1775.
|
380-09
A novel rapid route for synthesising WC-Co bulk by in situ reactions in spark plasma sintering. Liu W, Song X, Wang K. MATERIALS SCI. & ENGINEERING A, 2009, 499(1-2), 476-481.
|
381-09
The effect of thermal property degradation on wear of WC-Co inserts in dry cutting. Abdel-Aal H, Nouari M, Mansori M. WEAR, 2008, 265(11-12), 1670-1679.
|
382-09
Influence of electical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides. Bonny K, De Baets P, Ost W. WEAR, 2009, 266(1-2), 84-95.
|
383-09
Study of the sintering behaviour of fine, ultrafine and nanocrystalline WC-Co mixtures obtained by high energy milling. Salvador M, Bonache V, Amigo V. REVISTA DE METALRGIA, 2008, 44(5), 418-431.
|
384-09
Microstructure evolution in WC-Co composites during reactive sintering from nanocrystalline powders. Pirso J, Viljus M, joost R. ADVANCES IN POWDER METALLURGY & PARTICULATE MATERS., 2008, 3, 08-18--8-29.
|
385-09
The characterisation of WC-Co based materials boronised within molten salt bath. Koksal S. DIFFUSION & DEFECT DATA B, 2009, 144, 261-266.
|
386-09
Deposition and characterisation of diamond protective coatings on WC-Co cutting tools. Tang Y, Yang S, Yi W. CERAMIC ENGINEERING & SCI. PROC., 2009, 29(4), 69-74.
|
387-09
Fabrication and application of nano-microcrystalline composite diamond films on the interior hole surfaces of Co cemented tungsten carbide substrates. Sun F, Ma Y, Shen B. DIAMOND & RELATED MATERIALS, 2009, 18(2-3), 276-282.
|
388-09
On plastic deformation mechanisms of WC-15wt% Co alloys at 1000°C. Han X, Sacks N, Milman Y. INTNL J. REFRACTORY METALS & HARD MATERS., 2009, 27(2), 274-281.
|
389-09
Application of EBSD to the evaluation of plastic deformation in the mechanical testing of WC/Co hardmetal. Gee M, Mingard K, Roebuck B. INTNL J. REFRACTORY METALS & HARD MATERS., 2009, 27(2), 300-312.
|
390-09
Reciprocating sliding friction and wear behaviour of electrical discharge machined ziconia-based composites agains WC-Co cemented carbide. Bonny K, De Baets P, Vleugels J. INTNL J. REFRACTORY METALS & MATERS., 2009, 27(2), 449-457.
|
391-09
Characterisation of a bilayer WC-Co hardmetal using Hertzian indentation technique. Zhang H, Fang Z, Lu Q. INTNL J. REFRACTORY METALS & HARD MATERS., 2009, 27(2), 317-322.
|
392-09
Freeform fabrication of WC-Co/SUS304 composite materials by using three dimensional micro welding. Yamamoto Y, Kirihara S. MATERS. SCI. & TECHNOL., 2008, 4, 2374-2383.
|
393-09
Microstructure and wear resistance of WC-Co by three consolidation processing techniques. Picas J, Xiong Y, Punset M. INTL J. REFRACTORY METALS & HARD MATERS., 2009, 27(2), 344-349.
|
394-09
Design of cobalt gradient via controlling carbon content and WC grain size in liquid-phase-sintered WC-Co composite. Fan P, Guo J, Fang Z. INTNL J. REFRACTORY METALS & HARD MATERS, 2009, 27(2), 256-260.
|
395-09
Evolution of the WC grain shape in WC-Co alloys during sintering: Cumulated effect of the Cr addition and of the C content. Delanoe A, Lay S. INTNL J. REFRACTORY METALS & HARD MATERS., 2009, 27(2), 189-197.
|
396-09
Measurement of residual thermal stress in WC-Co by neutron diffraction. Mari D, Clausen B, Bourke M. INTNL J. REFRACTORY METALS & MATERS., 2009, 2792), 282-287.
|
|
|
