| |
Abstracts - Hard Materials1 2 3 4 5 6 7 8 9 10 11 12 13 Category list
July 2011 |
Hard Materials |
462-11
Effect of plasma nitriding on the performance of WC-Co cutting tools. Hamzaoglu E, Yilmaz S, Gulmez T. J. MATERS ENGINEERING & PERFORMANCE, 2011, 20(3), 405-408.
|
463-11
Effect of specimen size on the tensile strength of WC-Co hard metal. Klunsner T, Wurster S, Supancic P. ACTA MATERIALIA, 2011, 59(10), 4244-4252.
|
464-11
Model single point abrasion experiments on WC/Co hardmetals. Gee M, Nimishakavi L. INTNL J. REFRACTORY METALS & HARD MATERIALS, 2011, 29(1), 1-9.
|
465-11
XRD analysis and microstructure of milled and sintered V, W, C and Co powders. Bolokang A, Phasha M, Oliphant C. INTNL J. REFRACTORY METALS & HARD MATERS, 2011, 29(1), 108-111.
|
467-11
Effects of sintering temperature on properties of WC-TiC-TaC-Co cemented carbide. Yang J, Ye J, Liu Y. J. FUNCTIONAL MATERS., 2011, 42(Supp/1), 160-162.
|
468-11
Effect of decreasing of cobalt content in properties for diamond/cemented carbide tools. Waratta A, Hamdi M, Ariga T. AIP CONF. PROCEEDINGS, 2010, 1217, 1-5.
|
469-11
Study on mechanical properties of nanocrystalline WC-8Co cemented carbide by cold isostatic pressing. Zhongdian L. TOOL ENGINEERING, 2011, 45(2), 43-49.
|
470-11
APT analysis of WC-Co based cemented carbides. Weidow J. ULTRAMICROSCOPY, 2011, 111(6), 595-599.
|
471-11
Experimental study of an Al2O3/WC-Co nanocomposite based on a failure analysis of hammer bit. Fan Y, Huang Z, Gao D. ENGINEERING FALIRUE ANAL, 2011, 18(5), 1351-1358.
|
472-11
Diamond growth on WC-Co substrates by hot filament chemical vapour deposition: Effect of filament-substrate separation. Wei Q, Ashfold M, Mankelevich Y. DIAMOND & RELATED MATERS, 2011, 20(5-6), 641-650.
|
473-11
Effect on specimen size on the tensile strength of WC-Co hard metal. Klunsner T, Wurster S, Supancic P. ACTA MATERIALIA, 2011, 59(10), 4244-4252.
|
474-11
Sintering behaviour of of nanostructured WC-Co composite. Kumar A, Singh K, Pandey O. CERAMICS INTNL, 2011, 37(4), 1415-1422.
|
475-11
Numerical simulation of laser-tungsten inert arc deep penetration welding between WC-Co cemented carbide adn invar alloys. Xu P, Bao C, Lu F. INTNL J. ADVANCED MANUFACTURING TECHNOL., 2011, 53(9-12), 1049-1062.
|
April 2011 |
268-11
Structural and microstructural characterisation of nano-structured hardmetals of WC-Co/Ti/Ti+Co. Filgueira M, Lamin J, Batista A. PROCEEDINGS POWDER MET. WORLD CONGRESS & EXHIBITION, 2010, 1, 355-360.
|
269-11
VC, Cr3C2 doped ultrafine WC-Co cemented carbides prepared by spark plasma sintering. Sun L, Yang T, Jia C. INTNL J. REFRACTORY METALS & HARD MATERS, 2011, 29(2), 147-152.
|
270-11
Vacuum sintering of WC-8wt.% Co hardmetals from WC powders with different dispersity. Kurlov A, gusev A, Rempel A. INTNL J. REFRACTORY METALS & HARD MATERS, 2011, 29(2), 221-231.
|
271-11
Investigations on kinetics of formation of fcc-free surface layers on cemented carbides with Fe-Ni-Co binders. Garcia J. INTNL J. REFRACTORY METALS & HARD MATERS., 2011, 29(2), 306-311.
|
272-11
Early stage of sintering in near-nano WC/Co hardmetals. Caspers B, Saeuberlich T, Zumdick M. PROCEEDINGS OF THE POWDER METALLURGY WORLD CONGRESS & EXHIBITION, 2010, 3, 711-718.
|
273-11
A note on threshold velocity criteria for modelling the solid particle erosion of WC/Co MMCs. Jana B, Stack M. WEAR, 2011, 270(7-8), 439-445.
|
January 2011 |
098-11
Fabrication of nanostructured WC-based hard materials with different contents of Co by high frequency induction heated sintering. Kang D, Woo K, Kwon E. SURFACE REV. & LETTS, 2010, 17(2), 251-255.
|
099-11
On the use of alloyed W-Co-C-phases as a simultaneous W and Co source in WC-Co and WC-TiC-(Ta, NB)C-Co hardmetals. Reichel B, Wagner K, Janisch D. PLANSEE SEMINAR, 2009, 2, HM 46.
|
100-11
Model single point abrasion experiments on WC/Co hardmetals. Gee M, Nimishakavi L. PLANSEE SEMINAR, 2009, 3, AT 7.
|
101-11
The effect of sintering conditions on the properties of WC-10wt%Co PIM compacts. Choi s, Kang S, Kwon Y. RES. ON CHEMICAL INTERMEDIATES, 2010, 36(6/7), 743/748.
|
October 2010 |
744-10
Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact. Bonny K, De Baets P, Perez Y. WEAR, 2010, 268(11-12), 1504-1517.
|
745-10
Effect of metal and cubic carbide additions on interface chemistry, phase composition and grain growth in WC-Co based cemented carbides. Weidow J. DOKTORSAVHANDLIGAR, 2010, 3075, all.
|
|
|
