October 2006 |
Hard Materials |
931-06
Diamond deposition on WC-Co cutting tools after pre-treatment in reactive solutions. Janik J, Pavlov J, Vojs M.
|
932-06
Effects of Co content and WC grain size on wear of WC cemented carbide. Saito H, Iwabuchi A, Shimizu T.
|
933-06
Effects of lower cobalt binder concentrations in sintering of tungsten carbide. Li T, Li Q, Fuh J.
|
934-06
Fluidised bed micro-machining and HFCVD of diamond films onto Co-cemented tungsten carbide (WC-Co) hardmetal slabs. Polini R, Barletta M, Delogu M.
|
935-06
Hot filament chemical vapour deposition and wear resistance of diamond films of WC-Co substrates coated using PVD-arc deposition technique. Polini r, Mantini F, Barletta M.
|
936-06
Influence of oxygen and nitrogen addition during growth of CVD diamond on pure cobalt substrate. Neto M, Pereira E.
|
937-06
Microstructural-level model for the prediction of tool failure in WC-Co cutting tool materials. Park S, Kapoor S, DeVor R.
|
938-06
Preparing nano-crystalline rare earth doped Wc/Co powder by high energy ball milling. Liu S, Huang Z, Liu G.
|
939-06
Study of inhibition to leaching of cobalt from cemented carbide tools. Zhang H, Jia X, Gao Y.
|
940-06
Temperature pre-treatments of hardmetal substrates to reduce the cobalt content and improve diamond dpeosition. Ullram S, Haubner R.
|
941-06
The influence of microstructure on the magnetic properties of WC/Co Hardmetals. Topic I, Sockel H, Wellmann P.
|
942-06
Thermodynamic evaluation of the C-Co-W-Hf-Zr system for cemented carbides applications. Bratberg J, Jansson B.
|
943-06
TiN coating on an electrical discharge machined WC-Co hardmetal: surface integrity effects on indentation adhesion response. Casas B, Anglada M, Sarin V.
|
July 2006 |
689-06
Carbon control during MIM of WC-Co cemented carbide. Li R.
|
690-06
Cerium enrichment on sinter skin of mischmetal doped WC-Co cemented carbide. Zhang L, Chen S, Ziong X.
|
691-06
Computational investigations of the bonding layer in CVD-coated WC+Co cutting tools. Liu Z, McNerny C, Mehrotra P.
|
692-06
Investigation of phenomena taking place in LASER surface alloying steels of WC-Co. Bitay E, Roosz A.
|
693-06
Microstructure and property of sub-micro WC-10%Co particulate reinforced Cu matrix composites prepared by selective laser sintering. Gu D, Shen Y, Dai P.
|
694-06
Preparation of WC-Co composite powder by electroless plating and its application in laser cladding. Liu Z, Jian L, Tao W.
|
695-06
Sinter + HIP of ultrafine WC-Co hardmetals. Ordonez A, Gonzalez R, Sanchez J.
|
696-06
SPS in-situ synthesis of WC-Co hardmetal by direct carbonisation of tungsten cobalt oxide. Rao Y, Zhang J, Wang c.
|
697-06
The effect of PEG/PMMA composite binder system on the powder injection moulding of WC-Co hardmetal components.
|
698-06
The influence of microstructure on the magnetic properties of WC/Co hardmetals. Topic I, Sockel H, Wellmann P.
|
April 2006 |
431-06
Development of superfine crystalline WC-Co cemented carbides and their application on hole machining. Hou K.
|
432-06
Mechanisms of plastic deformation of WC-Co and Ti(C, N)-WC-Co. Stberg G, Buss K, Christensen M.
|
