April 2007 |
Hard Materials |
441-07
Impact of vacuum thermal treatments on the structure and magnetic properties of titanium oxide films doped with Co. Balagurov L, Klimonsky S, Kobeleva S.
|
442-07
Modelling WC-Co sintering shrinkage-effect of carbide grain size and cobalt content. Petersson A, Agren J.
|
443-07
Morphology of WC grains in WC-Co alloys: Theoretical determination of grain shape. Christensen M, Wahnstrom G, Lay S.
|
444-07
Fracture toughness determination of diamond impregnated PM cobalt. Dwan J.
|
445-07
In-situ synthetisation of WC-6Co cemented carbides by SPS. Wang K, Song X, Zhang J.
|
January 2007 |
150-07
The application of Hertzian indentation techniques on the study of deformation and fracture of WC-Co composites. Zhang H, Fang Z, Belnap J.
|
151-07
Consolidation of ultra fine WC and WC-Co hard materials by pulsed current activated sintering and its mechanical properties. Kim H, Shon I, Yoon J.
|
152-07
Deposition of adherent diamond coating on WC-Co substrate. Xu Z, Lev L, Lukitsch M.
|
153-07
Effect of high energy milling on the magnetic properties of the WC-10wt.%Co cemented carbides. Manuel J, de Araujo J, da Costa F.
|
154-07
Effect of microstructure on the Weibull Modulus of the bend strength of WC-Co. Viswanadham R.
|
155-07
The effect of tungsten buffer layer on the stability of diamond with tungsten carbide-cobalt nanocomposite powder during spark plasma sintering. Shi X, Shao G, Duan X.
|
156-07
Effects of Co, Ti Interlayer and post-annealing on the adhesion property between TiN coatings and WC-Co substrate. Kang D, Ok J, Heo S.
|
157-07
Electro discharge compaction of WC-Co composite material containing particles of diamond. Grigoriev E, Rosliakov A.
|
158-07
Fatigue behaviour of functionally graded cemented carbides. Liu Y, Liu F, Liaw P.
|
159-07
Increasing the abrasion resistance without decreasing the toughness of WC-Co of a wide range of compositions and grain sizes. Luyckx S, Sacks N, Love A.
|
160-07
Kinetics of cobalt gradient formation during the liquid phase sintering of functionally graded WC-Co. Eso O, Fang Z, Griffo A.
|
161-07
Microstructural evolution of WC/Co alloys with vanadium additions. Strauss J.
|
162-07
Preparation and properties of Al2O3/WC-Co Cermet. Zhen X, Gangqin S, Xinglong D.
|
163-07
Processing and microstructure of submicron WC-Co particulate reinforced Cu matrix composites prepared by direct laser sintering. Gu D, Shen Y.
|
164-07
Properties of NbC-Co cermets obtained by spark plasma sintering. Huang S, Van der Biest O, Li L.
|
165-07
Sintering of WC-Co powder with nanocrystalline WC by spark plasma sintering. Wang X, Xie Y, Guo H.
|
166-07
Structural analysis on planar defects formed in WC platelets in Ti-doped WC-Co. Lay S, Loubradou M, Schubert W.
|
167-07
Three-dimensional printing of tungsten carbide-10wt% cobalt using a cobalt oxide precursor. Kernan B, Sachs E, Oliveira M.
|
October 2006 |
929-06
Adhesion between CVD diamond and WC-Co induced by high-pressure and high-temperature. Dos Sants S, Balzaretti N, da Jornada J.
|
930-06
Deposition of diamond films on smooth surfaces of cemented carbide inserts with cobalt boride interlayers. Wang Y, Ma Y, Sun F.
|
