January 2007 |
Coatings |
120-07
The enhancement of the properties of WC-Co HVOF coatings through the use of nanostructured and microstructured feedstock powders. Guilemany J, Dosta S, Miguel J.
|
121-07
Fabrication and evaluation of D-gun sprayed WC-Co coating with self-lubricating property. Du H, Sun C, Hua W.
|
122-07
Microstructure and wear resistance of laser cladding nano-CeO2/Co-based alloy composite coating. Zhang S, Li M, Li H.
|
123-07
On microstructure, hardness and wear behaviour of flame sprayed Co base alloy coating deposited on mild steel. Yadav A, Arora N, Dwivedi D.
|
October 2006 |
899-06
A comparative study on the tribological behaviour of nanocrystalline nickel and cobalt coatings correlated with grain size and phase structure. Wang L, Gao Y, Xu T.
|
900-06
Effect of WC size on interface fracture toughness of WC-Co HVOF sprayed coatings. Watanabe M, Owada A, Kuroda S.
|
901-06
Electrolytic polishing of WC-Co coating prepared using high-velocity oxy - fuel system. Li F, Zhang Y, Liu M.
|
902-06
Formation of spherical grains in thermally-sprayed cobalt-based alloy coatings and evaluation of their volume parameters by metallographic stereological methods. Iordanova I.
|
903-06
Microstructure of Al2O3 nanocrystalline/cobalt-based alloy composite coatings by laser deposition. Li M, He Y, Yuan X.
|
904-06
Nano-SiC particles reinforced plasma sprayed WC-Co coating by laser melting process. Zhao J, Li Y, Wang L.
|
905-06
Studies of the metallurgical and mechanical properties of high velocity oxy-fuel sprayed stellite-6 coatings on Ni- and Fe-based superalloys. Sidhu T, Prakash S, Agrawal R.
|
906-06
Thick Co base coatings by Nd:YAG laser cladding: Process and residual strain analysis. De Oliveira U, Ocelik V, de Hosson J.
|
July 2006 |
649-06
Effect of heat treatment on wear behaviour of HVOF thermally sprayed WC-Co coatings. Asl S, Sohi M, Hokamoto K.
|
650-06
Electrodeposition and characterisation of Ni-Co-carbon nanotubes composite coatings. Shi L, Sun C, Gao P.
|
651-06
Galvanic coatings made of Molybdenum (Tungsten)-nickel(cobalt) alloys and intermetallic compounds on different materials. Malyshev V.
|
652-06
Influence of interfacial diffusion on mechanical property of vacuum fusion sinter (VFS) WC-Co composite coating. Huang X, Fan K, Sun Q.
|
653-06
Preparation of WC-Co alloy coating by electrothermal explosion ultrahigh velocity spraying. Duan P, Liu Z, Ji X.
|
654-06
Sliding wear behaviour of WC12% Co coatings at elevated temperatures. Yang Q, Senda T, Hirose A.
|
655-06
Thick Co base coatings by Nd:YAG laser cladding: process and residual strain analysis. De Oliveira U, Ocelik V, de Hosson J.
|
656-06
Yttrium, cobalt and yttrium/cobalt oxide coatings on ferritic stainless steels for SOFC interconnects. Qu W, Jian L, Ivey D.
|
April 2006 |
393-06
Mechanical and micrstructural properties of HVOF sprayed WC-Co and Cr3C2-NiCr coatings on the boiler tube steels using LPG as the fuel gas. Sidhu H, Sidhu B, Prakash S.
|
394-06
The galvanic coatings of Mo(W)-Ni(Co) alloys and intermetallic compounds on different materials. Malyshev V.
|
395-06
In situ laser synthesis of Co/Cu composite coating on copper substrate and its microstructural evolution. Zneg D, Xie C, Hu M.
|
396-06
Nanostructured Ni-WC-Co composited coatings fabricated by electrophoretic deposition. Wang Y, Xu Z.
|
397-06
Effect of nano-Y2O3 on microstructure of laser cladding cobalt-based alloy coatings. Mingxi L, Yizhu H, Xiaomin Y.
|
