July 2006 |
Alloys |
547-06
5D modelling of decagonal Al-Co-Ni based on the W-approximant. Deloudi S, Kobas M, Steurer W.
|
548-06
Co-rich decagonal Al-Co-Ni: Predicting structure, orientational order and puckering. Gu N, Henley C, Mihalkovic M.
|
549-06
Electrochemical synthesis of nickel (cobalt)-molybdenum (tungsten) intermetallic compounds. Malyshev V, hab A.
|
550-06
Microstructure of laser-melted Co/Co3Mo2Si wear resistant ternary metal silicide alloys. Yong L, An L, Lingyun Z.
|
551-06
Phase separation and stability of L21-type phase in Co2(Cr1-xFex)(Ga1-yAly) alloys. Kobayashi K, Kainuma R, Ishida K.
|
552-06
Phasonic disorder in decagonal Al-Co-Ni. Weber T, Kobas M, Steurer W.
|
553-06
Revolutionary microstructure control with phase diagram evaluation for the design of E21 Co2AlC-based heat-resistant alloys. Kimuyra Y, Sakai K, Mishima Y.
|
554-06
Short-range order in metastable Co75Pd25 melts. Holland-Moritz D, Schenk T, Simonet V.
|
555-06
Studies on low-temperature stability of decagonal Al-Co-Ni. Hassdenteufel K, Steurer W.
|
556-06
The formation of an Al-Cu-Co type decagonal quasicrystal in an [AlCuFe]-[AlCoNi] psuedo-binary alloy system. Lei Y, Dubois J, Calvo-Dahlborg M.
|
557-06
The thermal expansion and Co magnetic state in light RCo3 intermetallics (R = Pr, Nd, Sm). Gaidukova I, Granovsky s, Markosyan A.
|
April 2006 |
286-06
Microstructural characterisation of as-cast Co-Si alloys. Faria M, Coelho G, Nunes C.
|
287-06
Formation and mechanical properties of (Ce-La-Pr-Nd)-Co-Al bulk glassy alloys with superior glass-forming ability. Li R, Pang S, Men H.
|
288-06
First principles calculations of FePt, CoPt, Co3Pt and Fe3Pt alloys. MacLaren J, Duplessis R, Stern R.
|
289-06
Solid solutions in the Fe-Co-Ni-As0S system. Hem S.
|
290-06
Effect of strong magnetic field on strain age hardening of Co-based alloy. Chiba A, Kimijima K, Morikawa A.
|
291-06
Effect of the conditions of a biomimetic process on the formation of apatite on cobalt base alloys. Bocardo J, Heredia M, Hernandez D.
|
January 2006 |
001-06
Decomposition of Cu-Al-Mn alloys containing cobalt. Bublei I, Koval Y, Titov P.
|
002-06
Effects of heat treatment on mechanical and tribological properties of cobalt-base Tribaloy alloys. Liu R, Yao M, Patnaik P.
|
003-06
High temperature deformation and its influence factors of 95W-5(Ni/Fe/Co) alloy. Wenbin F, Erde W, Yang Y.
|
004-06
Metallographic study and wear resistance of a high-C wrought Co-based alloy Stellite 706K. Yao M, Wu J, Xu W.
|
005-06
Microstructure and tensile properties of cobalt-base elastic alloy after hard-drawn. Xiaohui Z, Shengwu G, Haibo H.
|
006-06
Observation of the lamellar phase in a Zr-free Sm(Co0.45Fe0.15Cu0.4)5 alloy (3 pages). Zhang Y, Gabay A, Hadjipanayis G.
|
007-06
Solid-state chemistry in a microwave oven: Preparation of Pd/Co alloy from Cyanogel coordination polymers. Vondrova M, Majstrik P, Gould S.
|
008-06
Solid-state synthesis of new glassy Co65Ti20W15 alloy powders and subsequent densification into a fully dense bulk glass. El-Eskandarany M, Omori M, Inoue A.
|
